|
Drill Series |
Diameter |
Product |
Description |
|---|---|---|---|
| UC2 |
0.075mm~0.25mm |
 |
Undercut drill with 2mm shank |
|
MD2 |
0.075mm~0.25mm |
|
Micro drill with 2mm shank |
|
MD |
0.10mm~0.45mm |
|
Micro drill |
|
MDF |
0.15mm~0.30mm |
 |
Micro drill for flexible board |
|
ST/STC |
0.50mm~3.175mm |
 |
Standard drill |
|
RD/RDCT |
3.20mm~6.50mm |
 |
Reverse drill/with chip break & thinning web |
|
UCCP |
0.10mm~0.75mm |
|
Undercut drill with higher rigidity design |
|
UCWU |
0.274mm~0.40mm |
|
Undercut drill with higher rigidity design |
|
UCY-1 |
0.075mm~0.40mm |
|
New geometry drill with balance design |
|
UCY-2 |
0.075mm~0.45mm |
|
New geometry drill with higher rigidity design |
|
UCY-3 |
0.200mm~0.45mm |
|
New geometry drill with better chip removal design |
|
UCNY |
0.20mm~0.55mm |
|
Undercut drill for HF board |
|
UCMT |
0.15mm~0.65mm |
|
Undercut drill with higher accuracy design |
|
UCEF |
0.20mm~0.45mm |
|
Undercut drill with higher rigidity design |
|
UC/UCC |
0.40mm~3.16mm |
|
Undercut drill |
|
SD/SDC |
0.30mm~3.15mm |
|
Slot drill |
|
SDU/SDUC |
0.30mm~1.75mm |
|
Slot drill with undercut design |
